# Standardization file for C:\NMO_dev\data_proc\fixed_Final\Temp_LMeasure_Final\HS_st218_MT1__56cb579916000012b4d0e116__mdell__2947a3.CNG.swc created with StdSwc version 1.31 on 5/23/18.
#
# code   irregularity_description. (action taken)
#     irregularity_type     coordinates
#
2.2  Line 1 is of type 3.  (no action taken)
     B1      X, Y, Z:  0.0  0.0  0.0
4.3  Radius of line 2 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  0.29  1.72  0.04
4.3  Radius of line 3 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  0.37  3.32  -0.16
4.3  Radius of line 4 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  0.57  3.5  -0.43
4.5  Radius of terminal line 5 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  1.3  3.77  -0.52
4.3  Radius of line 6 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  0.45  3.57  0.16
4.3  Radius of line 7 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  0.48  3.99  0.21
4.3  Radius of line 8 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  0.23  5.48  0.34
4.5  Radius of terminal line 9 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  0.05  7.1  0.14
4.5  Radius of terminal line 10 at 0.125 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  0.76  3.47  0.65
 
 
