# Standardization file for C:\Users\Carolina\Desktop\Quality_Check\postprocessing\Coate_Final\Temp_LMeasure_Final\KO_1_base_2_63x_1.CNG.swc created with StdSwc version 1.31 on 12/4/20.
#
# code   irregularity_description. (action taken)
#     irregularity_type     coordinates
#
2.2  Line 1 is of type 3.  (no action taken)
     B1      X, Y, Z:  0.0  0.0  0.0
2.5  Length of segment ending at point 3 <= 0.1 at 0.0949.  (no action taken)
     B1      X, Y, Z:  0.0  -0.25  0.03
2.4  Length of segment ending at point 41 >= 6.0 stdevs above mean at 0.7268.  (no action taken)
     B1      X, Y, Z:  0.4  -6.5  2.43
2.5  Length of segment ending at point 109 <= 0.1 at 0.0949.  (no action taken)
     B1      X, Y, Z:  6.29  0.0  0.95
2.5  Length of segment ending at point 172 <= 0.1 at 0.0917.  (no action taken)
     B1      X, Y, Z:  7.68  3.72  1.0
2.5  Length of segment ending at point 180 <= 0.1 at 0.09.  (no action taken)
     B1      X, Y, Z:  7.69  3.8  1.04
2.5  Length of segment ending at point 200 <= 0.1 at 0.0548.  (no action taken)
     B1      X, Y, Z:  0.01  -0.49  -0.02
2.5  Length of segment ending at point 267 <= 0.1 at 0.09.  (no action taken)
     B1      X, Y, Z:  5.42  4.46  0.0
2.5  Length of segment ending at point 268 <= 0.1 at 0.0693.  (no action taken)
     B1      X, Y, Z:  5.46  4.5  0.04
2.5  Length of segment ending at point 270 <= 0.1 at 0.064.  (no action taken)
     B1      X, Y, Z:  1.77  3.1  -2.0
2.5  Length of segment ending at point 363 <= 0.1 at 0.097.  (no action taken)
     B1      X, Y, Z:  0.02  11.61  4.24
 
 
