# Standardization file for C:\Users\Carolina\Desktop\Quality_Check\postprocessing\Coate_Final\Temp_LMeasure_Final\KO_1_apex_5_63x_4.CNG.swc created with StdSwc version 1.31 on 12/4/20.
#
# code   irregularity_description. (action taken)
#     irregularity_type     coordinates
#
2.2  Line 1 is of type 3.  (no action taken)
     B1      X, Y, Z:  0.0  0.0  0.0
2.5  Length of segment ending at point 2 <= 0.1 at 0.0922.  (no action taken)
     B1      X, Y, Z:  -0.02  0.0  0.09
2.5  Length of segment ending at point 80 <= 0.1 at 0.0906.  (no action taken)
     B1      X, Y, Z:  0.01  0.0  -0.09
2.5  Length of segment ending at point 244 <= 0.1 at 0.0943.  (no action taken)
     B1      X, Y, Z:  0.0  7.92  5.49
2.5  Length of segment ending at point 601 <= 0.1 at 0.099.  (no action taken)
     B1      X, Y, Z:  8.9  10.88  -0.04
2.4  Length of segment ending at point 643 >= 6.0 stdevs above mean at 0.5391.  (no action taken)
     B1      X, Y, Z:  12.9  12.9  -1.63
2.4  Length of segment ending at point 644 >= 6.0 stdevs above mean at 0.468.  (no action taken)
     B1      X, Y, Z:  13.25  13.16  -1.46
2.4  Length of segment ending at point 742 >= 6.0 stdevs above mean at 0.5046.  (no action taken)
     B1      X, Y, Z:  -1.77  18.99  11.67
2.4  Length of segment ending at point 914 >= 6.0 stdevs above mean at 0.4615.  (no action taken)
     B1      X, Y, Z:  6.38  19.0  7.39
2.5  Length of segment ending at point 1214 <= 0.1 at 0.0768.  (no action taken)
     B1      X, Y, Z:  0.54  30.42  -0.01
 
 
