# Standardization file for C:\Users\Carolina\Desktop\Quality_Check\postprocessing\Anstoetz_Final\Temp_LMeasure_Final\Anstoetz_Toolbox-CR1.CNG.swc created with StdSwc version 1.31 on 10/28/21.
#
# code   irregularity_description. (action taken)
#     irregularity_type     coordinates
#
4.5  Radius of terminal line 71 at 0.065 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  26.92  139.35  88.54
4.5  Radius of terminal line 229 at 0.065 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  -41.97  10.93  117.73
4.5  Radius of terminal line 300 at 0.065 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  -65.79  112.92  -18.56
4.5  Radius of terminal line 340 at 0.065 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  -111.81  1.73  -26.0
4.5  Radius of terminal line 377 at 0.065 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  -34.0  22.73  -30.14
4.5  Radius of terminal line 475 at 0.065 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  -7.16  332.64  15.54
4.5  Radius of terminal line 535 at 0.065 >= 5.0 stdevs above the mean.  (no action taken)
     B1      X, Y, Z:  -14.03  2.44  -45.21
2.4  Length of segment ending at point 442 >= 6.0 stdevs above mean at 19.0871.  (no action taken)
     B1      X, Y, Z:  -8.72  242.53  -10.69
2.1  Line 1 has 4 daughters.  Type is 1.  (no action taken)
     B1      X, Y, Z:  0.0  0.0  0.0
 
 
